MOUNTED M.B. PLOUGH (For small HP Tractor)
BENEFITS: (i) It can handle the tough ploughing job with outstanding penetration performance. (ii) Ploughing depth is accurately maintained by the automatic depth control unit available on the tractor. (iii) The mould board will retain mirror finish at all times contributing to well-turned furrows.
FEATURES: (i) The under-frame and unit -to-unit clearance are adequate to cope with trashy conditions. (ii) Perfect alignment of the plough beams carrying the Mould Board bottom is maintained by virtue of the frame construction. (iii) The plough has special wear-resistant steel bottoms with bar point for toughest ploughing jobs.(iv) Bar point bottom ensures longer life is it can be extended or reversed and re-used till the last possible length.
SPECIFICATIONS:
| 1 FURROW | 2 FURROW | |||||
| FRAME |
|
|
||||
| TYNE | 25 mm thick | 25 mm thick | ||||
| LENGTH | 1020 mm | 1600 mm | ||||
| WIDTH | 700 mm | 700 mm | ||||
| HEIGHT | 1020 mm | 1020 mm | ||||
| BLADE | 10 mm (EN-42) | 10 mm (EN-42) | ||||
| MOULD BOARD | 8 mm | 8 mm | ||||
| 3 POINT LINKAGE | 65x10 mm flat | 65x10 mm flat | ||||
| CLAMP | Drawbar clamp U-type | Drawbar clamp U-type | ||||
| WIDTH OF CUT | 350 mm (max) | 700 mm (max) | ||||
| DEPTH OF CUT | 250 mm (max) | 250 mm (max) | ||||
| WEIGHT | 112 Kg. (approx) | 190 Kg. (approx) | ||||
| POWER REQUIRED (HP) | 20-30 | 30-40 |
*The weight and working data contained in the present leaflet are supplied for information only and are not binding.
