Disc plough is used for initial cultivation of soil to prepare seedbed for crop. Disc Ploughs are designed to turn over the layer of soil, for soil mixing and for soil breaking. It also brings fresh nutrients to the surface and buries weeds and remains of last crop by turning over of soil. It can work with same efficiency in hard and dry soil conditions also. It is made of heavy duty pipe frame to increase life in bad field conditions. Windsor uses Boron Steel Disc Blades to manufacture disc plough that causes longevity of life of blades and less trouble. Using a heavy duty pipe frame the overall implement is comparatively light weight that leads to more fuel efficiency of tractor and less loads on engine.
Benefits and Features:
(1) The Disc Plough is designed to work in all type of soil for basic functions such as soil breaking, soil raising, soil turning and soil mixing.
(2) It is used to open the new fields and to process the stony areas.
(3) It can be used easily at rocky and rooted areas.
(4) It is especially useful in hard and dry trashy land conditions and in soils where scouring is a major problem.
(5) In conformity with the soil conditions it is being produced with 2-3-and 4 bottoms version with an option for extra kit for converting it to extra-bottom plough.
(6) It is directly mounted to the tractors.
(7) Extra Heavy-Duty Pipe Frame has high trash clearance allowing the plough to operate under heavy crop residue.
SPECIFICATIONS:
| |
2 BOTTOM |
3 BOTTOM |
4 BOTTOM |
5 BOTTOM(4+1) |
| FRAME |
Extra Heavy Duty Tabular Frame (OD 168 mm. ID 146 mm) |
Extra Heavy Duty Tabular Frame (OD 168 mm. ID 146 mm) |
Extra Heavy Duty Tabular Frame (OD 168 mm. ID 146 mm) |
Extra Heavy Duty Tabular Frame (OD 168 mm. ID 146 mm) |
| MOUNTED |
CAT-II |
CAT-II |
CAT-II |
CAT-II |
| DISCS |
600x6 mm |
660x6 mm |
660x6 mm |
660x6 mm |
| LENGTH |
1800 mm |
2400 mm |
3000 mm |
3600 mm |
| WEIGHT |
295 Kg. (approx) |
395 Kg. (approx) |
495 Kg. (approx) |
610 Kg. (approx) |
| TRACTOR (HP) |
45-50 |
60-65 |
75-85 |
100-110 |
| WIDTH |
820 mm |
1040 mm |
1260 mm |
1480 mm |
| HEIGHT |
1220 mm |
1220 mm |
1220 mm |
1220 mm |
| DISC SPACING |
570 mm |
570 mm |
570 mm |
570 mm |
| COLTER DISC
SCRAPPER |
500x6 mm
6 mm-adjustable |
500x6 mm
6 mm-adjustable |
500x6 mm
6 mm-adjustable |
500x6 mm
6 mm-adjustable |
| BEARINGS
WIDTH OF CUT |
2 Nos. Taper Roller/Disc
500-550 mm |
2 Nos. Taper Roller/Disc
875-925 mm |
2 Nos. Taper Roller/Disc
1150-1200 mm |
2 Nos. Taper Roller/Disc
1575-1625 mm |
*Above Stated data is for Reference Olny. |
Home 
